Custom Length Jacklines (Sold per Inch)
SKU:
$0.14
$0.14
per item
Assembled jackline at customer defined length. 1-inch wide, polyester webbing with edge guard to prevent onset of abrasion and chafe (rated at 9,800-lb. minimum breaking strength). Jackline eyelets sewn with PTFE thread.
Eyelet sizes are available in twelve (12) inch or three (3) inch. Eyelets can be fabricated into one (1) end or both ends (2) of the jackline. The three (3) inch eyelet is typically fabricated on both ends. Pricing for these options can be found at this link - Size and Number of Loops for Custom Jacklines.
See below for the 4-step custom ordering process.
Retail Price: $0.21
You Save: 33%
Your Savings: $0.07
Eyelet sizes are available in twelve (12) inch or three (3) inch. Eyelets can be fabricated into one (1) end or both ends (2) of the jackline. The three (3) inch eyelet is typically fabricated on both ends. Pricing for these options can be found at this link - Size and Number of Loops for Custom Jacklines.
See below for the 4-step custom ordering process.
Retail Price: $0.21
You Save: 33%
Your Savings: $0.07
Custom length polyester jacklines for boats. Keep the crew safe and onboard. Prevent a MOB situation.
- Step 1: Determine Routing Configuration
Boats come in a multitude of sizes, designs and layouts. For this reason many captains need a safety jackline that is reflective of their working areas on deck. Our design allows you to customize the layout for the specificity of your deck area. Modern boats often need something more than a traditional linear jacklines that run fore/aft along the deck of a boat. In order to give you an idea of potential routing configurations, see our example ROUTING DIAGRAM here.
Step 2: Determine Custom Length Jackline Webbing (in inches)
This is the most important step in the ordering process.
As it is not possible for Manu Kea to measure your webbing length required, it is the customer’s responsibility to accurately make the measurement. We have created a visual guide to assist in this process, click VISUAL GUIDE to see this document.
Step 3: Order the Custom Length Webbing
Add the required length (in inches) of the webbing measured in Step 2 above into the Custom Length Jackline quantity box above. Then select what size and number of loops that need to be fabricated. You will receive a continuous length of high-strength polyester webbing with the specified loop sizes sewn into the specified ends. The overall length of the finished webbing (to include the end loops) will be the length measured.
Note 1: Our fabrication tolerances are -0/+2 inches. This means that your webbing will never be shorter than the length measured, but may be between 0 to 2-inches longer than measured, due to the sewing fabrication process.
Note 2: If ordering more than one jackline, please place separate orders for the webbing and the loop sizes.
Step 4: Select Size and Number of Loops
For each jackline desired ordered select an option for size and number of loops by clicking here. This item covers the manufacturing costs and consists of all necessary components and documentation.
If you have any questions regarding this item, or the ordering process:
please contact us at [email protected] for prompt, friendly support! - Unlike many commercial jacklines: our design is easy to install and remove (when not needed)
- As this is a customized solution, it works well for all manner of boats requiring a safety jackline
- Does not use plastic parts or buckles to secure the webbing
- Comes complete and ready to use (purchaser must supply lashings and/or connectors)
- The twelve (12) inch eyelet is standard on most common jacklines and can be fabricated on one (1) or both ends (2)
- The three (3) inch eyelets allows one end of the jackline to be threaded back through the loop onto the attachment point and the other end is secured using lashings or mechanical fasteners (purchaser must supply lashings or mechanical fasteners)
- Custom orders for Large- and Mega-Yachts welcome
- Uses an industry leading, high-strength (9,800-lb. minimum breaking strength) webbing with chafe edge guard
- Webbing manufactured in the USA and the custom length jacklines assembled in the USA
- A very robust safety system that installs quickly and easily
- A safety system that provides a customized length for secure access to the foredeck, forward lockers, mast, sidedecks, etc. during periods of rough weather
- No plastic parts to screw into your deck
- Webbing is a 1-inch wide, polyester with an edge guard to prevent onset of abrasion and chafe. The webbing is rated at 9,800-lb. minimum breaking strength (MBS)
- Eyelets are sewn with PTFE thread
- Eyelet sizes are available in twelve (12) inch or three (3) inch sizes
- Eyelets can be sewn on one (1) end or both ends (2). The three (3) inch size is typically sewn onto both ends.
- Each Custom Length Jackline comes complete and ready to use (purchaser must supply lashings and/or connectors). Comes with a Certificate of Manufacture, Installation and Use & Care Instructions
- Webbing is available in a charcoal, silver or yellow color. They are very contrasting colors for decks of boats, thus making the webbing easy to see
Note 1: the yellow webbing is not available with edge guard. However, it is rated for 9,800-lb. MBS
Note 2: we currently do not offer the webbing in white due to it not being UV resistant- The overall system has a one (1) year limited warranty
Note: This is a custom order. We cut and fabricate this product to length for our valued customers. Once cut, there are no refunds. Please see our Store Policies for more information and please measure several times to ensure an accurate fit. Call us if you have any questions or concerns!
