Dinghy Davit Secure Straps (D2S2) - Extra Large
SKU:
$164.99
$164.99
Unavailable
per item
A set of stainless steel ratchets, high-strength straps and exclusive padded covers to secure (and immobilize) a dinghy while carried on your yacht's existing davits.
The D2S2 system ensures your dinghy does not swing, move, or damage davits while underway and during rough weather.
Exclusive design that mechanically provides the necessary strength to immobilize your dinghy properly.
Padded ratchet covers available in 4 colors.
Webbing available in 2 colors.
New Option for 2022! - A complementary addition of 3-inch loop at the working end of webbing to assist with installation by use of a boat hook or pole. Loop only comes in black.
The D2S2 system ensures your dinghy does not swing, move, or damage davits while underway and during rough weather.
Exclusive design that mechanically provides the necessary strength to immobilize your dinghy properly.
Padded ratchet covers available in 4 colors.
Webbing available in 2 colors.
New Option for 2022! - A complementary addition of 3-inch loop at the working end of webbing to assist with installation by use of a boat hook or pole. Loop only comes in black.
X-Large Dinghy Davit Secure Straps High Strength for boat safety, protect your dinghy from moving
- Easy to install and remove
- The only set of straps needed to secure a large dinghy, motor, and contents up to 1,000-lb. (454-kg) onto your existing davits
- No more using multiple lines or nylon dock lines (that always stretch) to keep your dinghy from moving
- Comes complete, ready to use with instructions
- Padded ratchet covers to protect your dinghy/RIB - available in 4 colors
- Your choice of black or silver colored webbing
- New option for 2022 - the addition of a 3-inch loop to the working end of the webbing to assist with installation. Loop only comes in black
- Strong, proven, effective, and with a professional look
- Made in the USA - please allow 2 days for manufacturing
Note: This set of straps wraps around the underside hull of your dinghy and then over the top of the davits. The ratchet is then used to apply the correct amount of tension to ensure that the dinghy and davits are completely immobilized for maximum safety while underway.- All-in-one solution to secure dinghies during passage
- Keeps your dinghy from moving (swinging, slamming, rocking, etc...) which is paramount to ensure your davits do not break or fail
- A moving, dynamic dinghy can quickly exceed the load carry capacity of a rated davit system by the additional forces being exerted on the dinghy. All too often sailors use available bits of old rope to try and secure a dinghy's motion. These attempts are many times futile, as the rope being used is undersized, cannot be tensioned properly, or exhibits stretch (elongation) while under load. For all these concerns, the D2S2 system is the solution
- Proven effective after four years of development and during gale-force conditions while offshore in 20-ft high waves
- 304 stainless steel ratchet has a minimum breaking strength of 6,600-lb. (3,000-kg) and a safe working load of 2,200-lb. (1,000-kg). Quickly secure a really big dinghy and heavy motor around your existing davits
- Each ratchet measures 12-in long (open position) and 9-in long (closed position). Entire set weighs 8-lb.
- The padded cover is constructed out of quality marine fabric, commercial closed-cell foam, and exclusive polymer mesh grid (to allow the ratchet to air dry - even while in the covered position) and PTFE thread for long service life
- Strong, UV-resistant, non-stretch polyester webbing comes in a 14-ft length (1-7/8-in wide). With a minimum breaking strength of 6,000-lb. (2,727-kg) and a safe working load of 2,000-lb. (909-kg)
- New option for 2022 - addition of 3-inch loop of 3/4-inch black polyester webbing stitched onto the working end of the webbing
Note: if a 14-ft strap is not long enough for your application, please contact us for assistance.- Overall system has a 1 year limited warranty.